首頁協會組織協會刊物政策法規經濟運行技術動態企業介紹會議活動書籍資料文獻摘要網上講座供求信息
  當前位置:首頁>>產品信息>>銅箔-建滔基層板控股有限公司

 

制造公司 建滔基層板控股有限公司
公司網站 http://www.kingboard.com
公司簡介
  建滔銅箔集團有限公司致力于電解銅箔的生產,在中國廣東省的佛岡與連州分設兩個生產基地?偼顿Y為22億港幣,年產電解銅箔72000噸,現有職員1500人。公司經歷了十多年的發展已經成為國內同行業中生產規模最大、自動化程度最高、品種最齊全,工藝最先進的電解銅箔生產基地。銅箔厚度范圍:8~140μm;產品除滿足國內需求外,還遠銷意大利、美國,加拿大等地。
  公司致力于打造一個“和諧、高效、求實、創新”的團隊,發揚建滔精神,實現企業目標。產品研發、生產制造和企業管理等各類專業技術人才濟濟一堂,傳承著十多年的電解銅箔制造經驗。公司產品有供覆銅面板和PCB生產專用的粗化銅箔和涂膠銅箔;并能生產市場所需的各種新型銅箔,如電池銅箔、甚低峰值銅箔、雙面處理銅箔和高溫高延銅箔等。
  “以先進的工藝和設備,科學化的管理手段,以人為本的管理理念,創造完美的品質,全心全意滿足客戶,追求卓越,不斷創新!弊鳛楣镜馁|量方針。全方位打造廣大客戶需要的產品。產品以卓越的外觀質量和內在性能贏得了眾多客戶的青睞,公司高度重視環保,以“清潔生產,循環經濟”為宗旨,建立節能環保機制,爭取實現無污染的半封閉生產的目標,成為綠色環保企業。并順利通過了ISO14001認證。
  為了適應可持續發展的要求,公司不斷超越自我,創造未來,致力于開發高、新、特、精的新型銅箔,以新的體制,新的姿態面對市場的挑戰,繼續為銅箔事業開拓創新。
Brief Introduction
  Kingboard Copper Foil Holdings Limited, with electrolyzed copper foils as its main product, now has two producing bases in Fogang and LianzhouofGuangdong Province. With a total investment of 2.2 billion HK dollars, the annual production of electrolyzed copper foils of 72,000 tons, and the registered stuff number of 1,500, Kingboard has, after dozens of years' development, become an all-round top company in the electrolyzed copper foil field, in terms of manufacture scale, automatic level, product variety and processing technics. Its copper foils,with thickness ranging from 8 to 140 μm, It is not only popular at Mainland, but also gains reputation and market in overseas,such as Italy, America, Canada, etc.
  Kingboard, as a compact group, has been practicing the spirit of "harmonious, effective,
  factualistic, innovative" to realize enterprise targets. Here, including diversified professionals specialized in product R&D, producing process and enterprise management gather and share
  experience of electrolyzed copper foil manufacturing. Besides its main products of rough copper foils and gelatinized copper foils which are specially used for the manufacture of copper-cover panels and PCBs, Kingboard also owns capacities for manufacturing new-style copper foils, such as battery copper foils, extremely low peak value copper foils, two-sided processing copper foils, high-temperature and high-extensibility copper foils, etc.
"Through advanced technics and equipments, scientific managing methods, human-oriented managing concepts, to create perfect quality and achieve maximized satisfaction in constant innovation." Based on these quality principles, Kingboard has made its products popular with enormous customers both for their appearance and performance. Besides, Kingboard has always been pay attention to great importance to environment protection. Following the principles of "circulation and economization", mechanism of energy saving and environmental protection has been established. On the way to realizing harmless and semi-closed manufacture, Kingboard has successfully passed ISO14001 attestation, and is now near its goal of becoming an environmentally friendly enterprise .
  In order to adapt to the new request of continuable development, Kingboard is now making every effort to exploit new kinds of copper foils that are excellent, novel, special and delicate in quality. It is now facing market challenges with a brand-new image as well as a renewed system, ready to make its own contributions to the copper foil industry.
                銅箔產品一覽表(1) Copper Foil Products List(1)

銅箔類型
Type

產品型號
Model

銅箔厚度Thickness

產品特性
Character

產品用途
Application

粗化銅箔Abrading copper foil

STD

12

高級單面處理電解銅箔,厚度均勻、無針孔、具有良好的高結合力和高溫抗剝、抗拉性能,有效的增大了板材的熱穩定性和導電性能,獨特的 Cu-Zn 合金處理改善銅箔的抗熱及抗化學性。
Advanced single-side treated with electrolytic copper foil, uniform thickness, and pinhole- free. Strong binding force, anti- stripping and anti- stretching performance at high temperature. Effectively increased thermal stability and the conductive properties of the sheet metal. Unique Cu-Zn alloy processing to improve the heat- and chemical- resistance of copper foil

適用于雙官能基四官能基之環氧樹脂基板中層數 MLB (多層板)及各種常用的板材使用。
Applicable to di- and tetra-functional groups of epoxy resin substrate, middle-layers MLB and other commonly used plates

 

18

35

50

70

105

140

普通涂膠銅箔Ordinary Adhesive coated foil

ACC

18

采用酚醛樹脂改性的聚乙烯醇縮醛樹脂做膠粘劑, 膠膜均勻、無雜質、無滲透孔,有更好的耐浸焊和抗剝性能,與紙基結合具有優秀的耐熱性和阻燃性
The phenolic resin modified polyvinyl acetal resin is used as adhesive. Uniform film with no impurities and no penetration hole. Better dip-soldering resistance and anti-peeling performance. Excellent heat resistance and flame retardance when combined with paper-base and flame relardant

適用于中、低端民用電子產品及辦公自動化設備的電源基板
Applicable to the power substrate of low- and middle-end civil electronic products and automatic office equipment

 

25

35

70

CTI 涂膠銅箔
CTI Adhesive
coated foil

CTI

35

除了具有普通涂膠箔良好的耐浸和抗剝性能以外 , 并且具有( 600V )無漏電起痕特性。
In addition to the good dip-soldering resistance and anti-peeling performance of the ordinary adhesive coated foil , no proof tracking under high-voltage (600V) is also featured

適用于高端民用電子產品及辦公自動化設備的電源基板
Applicable to di- and tetra-functional groups of epoxy resin substrate, middle-layers MLB and other commonly used plates

70


               銅箔產品一覽表(2) Copper Foil Products List(2)

銅箔類型
Type

產品型號
Model

銅箔厚度Thickness

產品特性
Character

產品用途
Application

高 TG
銅箔
HTG copper foil

HTG

18

高級單面處理電解銅箔,厚度均勻、無針孔具有良好的高結合力和高溫抗剝、抗拉性能。Advanced single-side treated electrolytic copper foil, uniform thickness, and pinhole- free. Strong binding force, anti- stripping and anti- stretching performance at high temperature. Effectively increased thermal stability and the conductive properties of the sheet metal

適用于高 TG
(≥ 150 ℃ )基材Applicable to the HTG (≥ 150 ℃ ) substrates

35

70

105

低峰值銅箔
Low peak value copper foil

LP

12

高級單面處理電解銅箔,厚度均勻、無針孔。經粗化處理,產品具有超低峰值特性,具有卓越的蝕刻性能,適用于多層 PCB 超薄內層( FR-4 ),適合精細線路或有阻抗值控制產品
Advanced single-side treated electrolytic copper foil, uniform thickness, and pinhole-free. Possessing the characteristic of ultra-low peak value by abrading the product. Outstanding performance of etching. Applicable to the ultra-thin core board (FR-4) of multi-layer PCB Suitable for fine lines or impedance control products

適用于高頻基材制作內層薄芯板
Applicable to the high-frequency base material in the production of inner thin coreboard.

18

35

70

105

高溫高延銅箔High Temperature Elongation copper foil

HTE

18

具有在高溫或退火處理后的高延伸性,具有良好的黏附能力, 極高的 THE 特性,有效防止內盤裂化。 High elongation after treated with high temperature or annealing. Good adhesion ability . High THE property. Effective in the prevention of cracking plate

適用于剛性材料及傳統多層板壓合要求
Applicable to the lamination of rigid materials and traditional multilayer board

35

70

105

雙面處理銅箔 Double-side treated copper foil

DT

18

高級雙面處理銅箔,與傳統 FR-4 有更好結合力 , 直接進行多層壓合之特性 , 可替代化學“氧化”工序,提高 PCB 制程時效 , 卓越的蝕刻性能Advanced double-side treated copper foil, with better binding force to traditional FR-4. Direct multi-layer lamination properties. An alternative of chemical "oxidation" process, improving the aging of PCB process. Outstanding performance of etching

用于內層芯板
For the use of inner core board

35

70

105


              銅箔產品一覽表 (3) Copper Foil Products List(3)

銅箔類型
Type

產品型號
Model

可應用銅箔厚度Thickness

產品特性
Character

產品用途
Application

光面處理銅箔 Shining-side abrading copper foil

RTC

18

光面進行結合行高級處理 , 滿足多層板在壓合后有極強的固著力 , 有利于內層進行化學 “ 黑化 ” 工序與感光膜有良好的結合力。
Advanced treatment of the shining side in combining line. Strong fixing force after lamination with MLB. In favor of the inner chemical black-oxide process. Good combining strength with photographic film.

適用于高密度,精細線路板
Applicable to high-density, fine board

 

35

70

105

單面光電池箔Single shining side battery copper foil

LBEC-02

8

普通單面處理 , 具有超薄特性 , 具有較好的延展性 , 進行粘附時有良好的涂覆性。
Ordinary single-side treating. Possessing the characteristic of ultra-thin. Good ductility. Good coating when the adhesion is carried out

用于移動電話、筆記本電腦等電子產品之鋰離子電池Use for the Li-ion battery of mobile phones, notebook computers and other electronic products

9

10

12

15

20

雙面毛電池箔Double matte side battery copper foil

LBEC-03

9

高級雙面處理鋰離子電池銅箔,具有超薄特性可雙面涂覆漿料,有高承載電量的優點進行粘附時有良好的涂覆性
Advanced double-side treated copper foil in Li-ion batteries. Possessing the characteristics of ultra-thin. Slurry can be coated on both sides, and the advantage of high electric quality carrying capacity is possessed. Good coating when the adhesion is carried out

10

12

18

雙面光電池箔Doubie shining side battery copper foil

LBEC-01

8

9

10

12

15

20

【注】以上所顯示的厚度為公稱厚度,敝司可根據客戶需求定制8-140μm之間任意厚度銅箔。
Note:The aboved thickness is the nominal thickness, Our company can customize the thickness of copper foil bewteen 8 to 140 μm according to customer's requirements。

LOGO 標識
卷材粗化銅箔箱號 Case No. of coiled abrading copper foil
         
【說明】
⑴產箔單位-----無字母表示佛岡銅箔廠,LZ表示連州銅箔廠 Instruction:
⑴.Company-----No letters: Fogang Company LZ: Lianzhou Company
⑵銅箔厚度-----單位為μm (2). Thickness-----Unit:μm
⑶銅箔種類-----STD 表示標準銅箔 (3). Type-----STD is Standard copper foil
BC 表示電池銅箔 BC is Copper foil for battery-use
CTI 表示標準耐高電壓銅箔 CTI is Standard High-voltage resistant foil
HTE 表示高溫高延銅箔 HTE is High Temperature Elongation copper foil
⑷銅箔處理---
MZ 表示毛面處理鍍鋅銅箔 (4)Treatment---MZ is Matte-side treated zinc plating foil
MC 表示毛面處理鍍銅銅箔 Matte-side treated copper plating foil
MR 表示毛面鍍銅銅箔(新工藝)
MR is matte-side treated copper plating foil(the new process)
SZ 表示光面處理鍍鋅銅箔 Shining-side treated zinc plating foil
SC 表示光面處理鍍銅銅箔 Shining-side treated copper plating foil
SR 表示光面鍍銅銅箔(新工藝)
SR is shining-side treated copper plating foil(the new process)
DZ 表示雙面處理鍍鋅銅箔 Double-side treated zinc plating foil
DC 表示雙面處理鍍銅銅箔 Double-side treated copper plating foil
DR 表示雙面鍍銅銅箔(新工藝)
DR is double-side treated copper plating foil(the new process)
DZC 表示雙面處理光面鍍鋅毛面鍍銅銅箔
Double-side treated foil with zinc plating on matte-side and copper plating on shining-side
DCZ 表示雙面處理光面鍍銅毛面鍍鋅銅箔
Double-side treated foil with copper plating on matte-side and zinc plating on shining-side
C 表示涂膠紅化箔 red-adhesive foil
Z 表示涂膠灰化箔 gray-adhesive foil

標準粗化銅箔(STD)
技術特性
● 高級單面處理電解銅箔,厚度均勻、無針孔
● 具有良好的高結合力和高溫抗剝、抗拉性能
● 有效的增大了板材的熱穩定性和導電性能
● 獨特的Cu-Zn合金處理改善銅箔的抗熱及抗化學性
● 典型板材包括:CEM-1,CEM-3,FR-3,FR-4
Technical character
● Advanced single-side treated with electrolytic copper foil, uniform thickness, and pinhole- free.
● Strong binding force, anti- stripping and anti- stretching performance at high temperature.
● Effectively increased thermal stability and the conductive properties of the sheet metal.
● Unique Cu-Zn alloy processing to improve the heat- and chemical- resistance of copper foil
● Typical sheet metal including: CEM-1, CEM-3, FR-3, FR-4
      
【備注】
● 適用于雙官能基及四官能基之環氧樹脂基板,中層數MLB(多層板)
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 品質依據GB/T5230-1995及IPC-4562 標準
Remarks:
● Applicable to di- and tetra-functional groups of epoxy resin laminates, middle-layers MLB
● Should not be stored at a high temperature (higher than 30 ℃) and high humidity (relative
humidity above 70%) for a long time
● The quality is based on the GB/T5230-1995 and IPC-4562 standard


General Properties 一般特性(STD 1OZ/35μ)

測試項目
Test Item

單位
Unit

處理條件
Condition

測試方法Testing Method

規范值
Specification Value

典型值
Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity ( Silver Content Included )

IPC-4562 3.8.1 .1

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥ 28000

36000

Tensile Strength

IPC-4562 3.5.1

延伸率

%

IPC-TM-650 2.4.18

≥ 3.0

10.0

Elongation

IPC-4562 3.5.3

面積重量

g/m2

IPC-TM-650 2.2.12

275-295

285

Area Weight

IPC-4562 3.4.4

剝離強度

kgf/cm

IPC-TM-650 2.4.8

≥ 1.60

2.00

Peeling Strength

IPC-4562 3.5.4

高溫抗氧化性

/

E-30/200

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

耐化學性

%

18%HCL-60
min/25℃

IPC-TM-650

≤ 4.0

2.5

Chemical resistance

可蝕刻性

/

A

IPC-TM-650 2.3.6

金屬箔表面處理,應能正常的蝕刻工藝除去

OK

Etchability

IPC-4562 3.6.1

可焊性

/

IPC-TM-650 2.4.12

不應有焊料不潤濕的跡象

OK

Solderability

IPC-4562 3.6.3

質量電阻率

Ω.g/m2

C96/35/90

IPC-TM-650 2.4.14

≤ 0.162

0.156

Surface Resistivity

IPC-4562 3.8.12

粗糙度

光面

μm

A

IPC-TM-650 2.4.17

≤ 0.43

0.18

Shiningside -Ra

IPC-4562 3.5.6

Roughness

毛面

μm

IPC-TM-650 2.4.17

≤ 10.00

7.00

Matte side-Rz

IPC-4562 3.5.6

Rena rks:Typical values for reference only
【注】典型值只作參考Stand values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

涂膠銅箔(ACC)
技術特性
● 采用酚醛樹脂改性的聚乙烯醇縮醛樹脂做膠粘劑
● 膠膜均勻、無雜質、無滲透孔
● 比標準涂膠箔有更好的耐浸焊和抗剝性能
● 與紙基結合具有優秀的耐熱性和阻燃性
Technical character
● The phenolic resin modified polyvinyl acetal resin is used as adhesive
● Uniform film with no impurities and no penetration hole
● Better dip-soldering resistance and anti-peeling performance than the standard adhesive foil
● Excellent heat resistance and flame retardance when combinated with paper-base and flame relardant
      
【備注】
● 適用于高端民用電子產品及辦公自動化設備的電源基板
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 試驗依據GB/T5230-1995及GB/T4722-92
Remarks:
● Applicable to the power substrate of high-end civil electronic products and
automatic office equipment
● Should not be stored at a high temperature (higher than 30 ℃) and high humidity
(relative humidity above 70%) for a long time
● All tests are based on GB/T5230-1995 and GB/T4722-92

General Properties 一般特性(ACC 1OZ/35μm)

測試項目
Test Item

單位
Unit

處理條件Condition

測試方法
Testing Method

規范值
Specification Value

典型值
Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity ( Silver Content Included )

IPC-4562 3.8.1 .1

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥28000

35000

Tensile Strength

IPC-4562 3.5.1

延伸率

%

IPC-TM-650 2.4.18

≥4.0

10.0

Elongation

IPC-4562 3.5.3

面積重量

g/m2

IPC-TM-650 2.2.12

275-295

285

Area Weight

IPC-4562 3.4.4

剝離強度

kgf/cm

IPC-TM-650 2.4.8

≥1.43

1.65

Peeling Strength

IPC-4562 3.5.4

耐焊( 260 ℃ )

SEC

S-260

IPC-TM-650

≥ 15

20

Solder Resistance

IPC-4562

膠水樹脂含量

g/m2

E-0.5/160

IPC-TM-650

18-22

18

Adgesive Resin Content

膠水含揮發物比率

%

E-0.5/160

IPC-TM-650

1.5-5.0

3.5

volatile Content in Adhesive

高溫抗氧化性

/

E-30/200

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

可蝕刻性

/

A

IPC-TM-650 2.3.6

金屬箔表面處理,應能正常的蝕刻工藝除去

OK

Etchability

IPC-4562 3.6.1

可焊性

/

IPC-TM-650 2.4.12

不應有焊料不潤濕的跡象

OK

Solderability

IPC-4562 3.6.3

質量電阻率

Ω.g/m2

C96/35/90

IPC-TM-650 2.4.14

≤ 0.162

0.158

Surface Resistivity

IPC-4562 3.8.12

粗糙度

光面
Shiningside -Ra

μm

A

IPC-TM-650 2.4.17

≤ 0.43

0.16

IPC-4562 3.5.6

Roughness

毛面
Matte side-Rz

μm

IPC-TM-650 2.4.17

≤ 10.00

7.00

IPC-4562 3.5.6

尺寸
Size

寬度

mm

GB/T 4721-92 21

訂單規格 ± 1.6mm

1260

Width

IPC-4562 3.4.2

Rena rks:Typical values for reference only
【注】典型值只作參考Stand values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

CTI涂膠銅箔(CTI)
技術特性
● 采用酚醛樹脂改性的聚乙烯醇縮醛樹脂做膠粘劑
● 膠膜均勻、無雜質、無滲透孔
● 比標準涂膠箔有更好的耐浸焊和抗剝性能
● 與紙基結合具有優秀的耐熱性和阻燃性
● 具有在高壓(600V)無漏電起痕特性
Technical character
● The phenolic resin modified Polyvinyl alcohol acetal resin is used as adhesive
● Uniform film with no impurities and no penetration hole
● Better dip-soldering resistance and anti-peeling performance than the standard adhesive foil
● Excellent heat resistance and flame retardance when combinated with paper-base and flame relardant
● No Proof tracking under high-voltage (600V)
       
【備注】
● 適用于高端民用電子產品及辦公自動化設備的電源基板
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 試驗依據GB/T5230-1995及GB/T4722-92
Remarks:
● Applicable to the power substrate of high-end civil electronic products and
automatic office equipment
● Should not be stored at a high temperature (higher than 30 ℃) and high humidity
(relative humidity above 70%) for a long time
● All tests are based on GB/T5230-1995 and GB/T4722-92

General Properties 一般特性(CTI 1OZ/35μm)

測試項目
Test Item

單位
Unit

處理條件Condition

測試方法
Testing Method

規范值
Specification Value

典型值
Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity ( Silver Content Included )

IPC-4562 3.8.1 .1

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥28000

35000

Tensile Strength

IPC-4562 3.5.1

延伸率

%

IPC-TM-650 2.4.18

≥4.0

10.0

Elongation

IPC-4562 3.5.3

面積重量

g/m2

IPC-TM-650 2.2.12

275-295

285

Area Weight

IPC-4562 3.4.4

剝離強度

kgf/cm

IPC-TM-650 2.4.8

≥1.60

1.80

Peeling Strength

IPC-4562 3.5.4

耐焊

SEC

S-260

IPC-TM-650

≥ 15

20

Solder Resistance

IPC-4562

膠水樹脂含量

g/m2

E-0.5/160

IPC-TM-650

28-40

31

Adgesive Resin Content

膠水含揮發物比率

%

E-0.5/160

IPC-TM-650

1.5-5.0

3.5

volatile Content in Adhesive

高溫抗氧化性

/

E-30/200

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

可蝕刻性

/

A

IPC-TM-650 2.3.6

金屬箔表面處理,應能正常的蝕刻工藝除去

OK

Etchability

IPC-4562 3.6.1

CTI 值

V

0.1% NH 4 Cl

/

60/600

CTI Value

質量電阻率

Ω.g/m2

C96/35/90

IPC-TM-650 2.4.14

≤ 0.162

0.158

Surface Resistivity

IPC-4562 3.8.12

粗糙度

光面
Shiningside -Ra

μm

A

IPC-TM-650 2.4.17

≤ 0.43

0.16

IPC-4562 3.5.6

Roughness

毛面
Matte side-Rz

μm

IPC-TM-650 2.4.17

≤ 10.00

7.00

IPC-4562 3.5.6

尺寸
Size

寬度
Width

mm

GB/T 4721-92 21

訂單規格 ± 1.6mm

1260

IPC-4562 3.4.2

Rena rks:Typical values for reference only
【注】典型值只作參考Stand values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

低峰值銅箔(LP)
技術特性
● 高級單面處理電解銅箔,厚度均勻、無針孔
● 經粗化處理,產品具有超低峰值特性
● 具有卓越的蝕刻性能
● 適用于多層PCB超薄內層(FR-4)
● 適合精細線路或有阻抗值控制產品
Technical character
● Advanced single-side treated electrolytic copper foil, uniform thickness, and pinhole-free
● Possessing the characteristic of ultra-low peak value by abrading the product
● Outstanding performance of etching
● Applicable to the ultra-thin layer (FR-4) of multi-layer PCB
● Suitable for fine lines or impedance control products
      
【備注】
● 適用于高頻基材制作內層薄芯板
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 品質依據GB/T5230-1995及IPC-4562 標準
Remarks:
● Applicable to the high-frequency material in the production of inner thin coreboard
● Should not be stored at a high temperature (higher than 30 ℃) and high humidity (relative humidity above 70%) for a long time
● The quality is based on the GB/T5230-1995 and IPC-4562 standard

General Properties 一般特性(LP 1OZ/35μm)

測試項目
Test Item

單位
Unit

處理條件 Condition

測試方法
Testing Method

規范值
Specification Value

典型值
Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity ( Silver Content Included )

IPC-4562 3.8.1 .1

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥ 28000

35000

Tensile Strength

IPC-4562 3.5.1

延伸率

%

IPC-TM-650 2.4.18

≥ 3.0

10.0

Elongation

IPC-4562 3.5.3

面積重量

g/m2

IPC-TM-650 2.2.12

275-295

285

Area Weight

IPC-4562 3.4.4

剝離強度

kgf/cm

IPC-TM-650 2.4.8

≥ 1.60

1.80

Peeling Strength

IPC-4562 3.5.4

高溫抗氧化性

/

E-30/200

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

耐化學性

%

18%HCL-60min/25 ℃

IPC-TM-650

≤ 4.0

2.1

Chemical resistance

可蝕刻性

/

A

IPC-TM-650 2.3.6

金屬箔表面處理,能正常的蝕刻工藝除去

OK

Etchability

IPC-4562 3.6.1

可焊性

/

IPC-TM-650 2.4.12

不應有焊料不潤濕的跡象Solder should be wetted.

OK

Solderability

IPC-4562 3.6.3

質量電阻率

Ω.g/m2

C96/35/90

IPC-TM-650 2.4.14

≤ 0.162

0.153

Surface Resistivity

IPC-4562 3.8.12

粗糙度

光面

μm

A

IPC-TM-650 2.4.17

≤ 0.43

0.21

Shiningside -Ra

IPC-4562 3.5.6

Roughness

毛面

μm

IPC-TM-650 2.4.17

≤ 7.00

4.52

Matte side-Rz

IPC-4562 3.5.6

Remarks:Typical values for reference only
【注】典型值只作參考Standard values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

雙面光電池銅箔(LBEC-01)
技術特性
● 毛面極低峰值高級鋰離子電池銅箔
● 具有超薄特性
● 可根據需要單雙面涂覆漿料
● 進行粘附時有良好的涂覆性
Technical character
● Copper foil in Li-ion batteries with extremely low peak value of the matte side
● Possessing the characteristics of ultra-thin
● Slurry can be coated on single side or both sides as needed
● Good coating when the adhesion is carried out
      
【備注】
● 用于移動電話、筆記本電腦等電子產品之鋰離子電池
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 品質依據GB/T5230-1995、SJ/T11483-2014及IEC 標準
Remarks:
● Applicable to the Li-ion battery of mobile phones, notebook computers and other electronic products
● Should not be at a high temperature (higher than 30 ℃) and high humidity (relative humidity above 70%) for a long time storage
● The quality is based on the GB/T5230-1995、SJ/T11483-2014 and IEC standard

General Properties 一般特性(LBEC-01/8μm)

測試項目
Test Item

單位 Unit

處理條件 Condition

測試方法
Testing Method

規范值 Specification Value

典型值 Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity(Silver Content Included)

SJ/T11483-2014

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥ 29400

33000

Tensile Strength

SJ/T11483-2014

延伸率

%

IPC-TM-650 2.4.18

≥ 3.0

7.0

Elongation

SJ/T11483-2014

面積重量

g/m2

IPC-TM-650 2.2.12

70-75

73

Area Weight

SJ/T11483-2014

高溫抗氧化性

/

E-15min/140℃

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

表面潤濕張力

10-3N/m

A

GB/T 22638.4

≥ 32

50

Surface wetting tension

SJ/T11483-2014

粗糙度

光面

Ra

μm

A

IPC-TM-650 2.4.17

≤ 0.3

0.22

Shiningside

SJ/T11483-2014

Roughness

毛面

Rz

≤ 3.0

1.5

Matte side

SJ/T11483-2014

Remarks:Typical values for reference only
【注】典型值只作參考Standard values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

單面光電池銅箔(LBEC-02)
技術特性
● 普通單面處理
● 具有超薄特性
● 具有較好的延展性
● 進行粘附時有良好的涂覆性
Technical character
● Ordinary single-side treating
● Possessing the characteristic of ultra-thin
● Good scalability
● Good coating when the adhesion is carried out
       
【備注】
● 用于移動電話、筆記本電腦等電子產品之鋰離子電池
● 不應在高溫(高于30℃)高濕(相對濕度在70%以上)條件環境下長時間貯存
● 品質依據GB/T5230-1995、SJ/T11483-2014及IEC 標準
Remarks:
● Use for the Li-ion battery of mobile phones, notebook computers and other electronic products
● The foil should not be at a high temperature (higher than 30 ℃) and high humidity (relative humidity above 70%) for a long time storage
● the quality is based on the GB/T5230-1995、SJ/T11483-2014 and IEC standard

General Properties 一般特性(LBEC-02/9μm)

測試項目
Test Item

單位
Unit

處理條件
Condition

測試方法
Testing Method

規范值 Specification Value

典型值
Typical Value

純度 ( 包括銀含量 )

%

A

IPC-TM-650 2.3.15

≥ 99.8

99.95

Purity ( Silver Content Included )

SJ/T11483-2014

拉力強度

N/cm2

IPC-TM-650 2.4.18

≥ 30000

35000

Tensile Strength

SJ/T11483-2014

延伸率

%

IPC-TM-650
2.4.18

≥ 2.5

5.8

Elongation

SJ/T11483-2014

面積重量

g/m2

IPC-TM-650 2.2.12

85-90

88

Area Weight

SJ/T11483-2014

高溫抗氧化性

/

E-15min/140℃

IPC-TM-650

S 面 不氧化

OK

Heat Resistance

M 面 不變色

表面潤濕張力

10-3N/m

A

GB/T 22638.4

≥ 32

50

Surface wetting tension

SJ/T11483-2014

粗糙度

光面

μm

A

IPC-TM-650 2.4.17

≤ 0.40

0.22

Shiningside -Ra

SJ/T11483-2014

Roughness

毛面

μm

IPC-TM-650 2.4.17

≤ 4.0

2.3

Matte side-Rz

SJ/T11483-2014

Remarks: Typical values for reference only
【注】典型值只作參考Standard values according to IPC-4562 規格值參照IPC-4562
   A=Maintain original shape,do not make handling 保持原樣,不作處理
   C=Temperture and humidity conditioning 在恒溫恒濕的空氣中處理
   E=Temperature congitioning 在恒溫的空氣中處理

 

 

 

主辦單位:中國電子材料行業協會覆銅板材料分會 聯系電話:029-33335234 Email:ccla33335234@163.com
聲明:任何網站如需轉載本網站任何內容,請先與本網站聯系,未經同意,不得轉載
版權所有©中國覆銅板信息網
国产99re6热在线播放